7Sense

Powering on the device

  • The power button is located on the right side of the back bottom of the device. The button is extruding and larger than buttons on the other side of the device. Button is sliding type – push it forward to power on (device „ON“ position is the switch position next to the „P“ in Braille), backward (toward the back of the device) to power off.
  • Powering on sequence takes about 30 seconds. When the device has powered on, you will hear the start-up sound and Haptic mat will start animation “ping-pong”.
  • You can already place the device in head when it is powering on
  • If the device does not power on (no start-up sound and no haptic animation), check that it is fully charged, and if necessary reboot the device. Switch power off for 20 seconds, then switch power on again.
Skip to content