7Sense

Adjusting the device to fit your head correctly

  • Loosen the back strap with the adjusting wheel to its maximum extended position.
  • Place the device carefully to your head. Adjust the top strap by pulling the lock tab and adjusting the strap lenght. The device should be slightly tilted backwards, and the bottom part of the Haptic mat should be just above the eyebrows. The whole forehead should be nicely covered with Haptic mat.
  • Tighten the back strap carefully by turning the adjusting wheel to just the point, when Haptic mat confortably touches all points of your forehead – center, top, bottom, left, right. Do not overtighten – you should feel the Haptic mat is lightly touching your forehead. If you tighten the Haptic mat too strongly, the digital feeling it creates will be less strong and clear.
  • It may be necessary to adjust top strap again once you have tightened the rear strap.

IMPORTANT: THE CORRECT AND THROUGHOUT ADJUSTMENT OF THE STRAPS AND DEVICE POSITION ON THE HEAD DETERMINE HOW GOOD AND CLEAR THE HAPTIC IMAGE IS. SPEND THE NECESSARY TIME AND TEST TO FIND THE BEST ADJUSTMENTS FOR YOUR HEAD – ALL HEADS ARE INDIVIDUAL.

Skip to content